Not one but many protection

Different product consist of different percentage of materials and is more suitable to certain places accordingly.

 
 
 

TruPrime 20

mining

waterproofing

anti-corrosion

TruPrime20 may be used with all TruCoat rapid curing polyurea sealants and spray coating systems. This product is designed for use in both interior and exterior priming situations.

TruPrime20 is a two-component isocyanate and resin-blend primer that can be used on a variety of porous substrates. To reduce viscosity, TruPrime20 may be diluted with acetone. The primer has a working time of 45 minutes.

For more information on TruPrime20 product data sheet, click the button below.

Request data sheet

TC 180

flexible

waterproofing

odorless

TruCoat TC180 is a rapid setting, 100% solids, flexible, ultra low shrinkage ,aromatic two-component polyurea. This odorless volatile-free elastomeric is specially designed to be applied to various substrates.

TruCoat TC180 is a rapid setting, 100% solids, flexible, aromatic two-component polyurea. This odorless volatile-free elastomeric is specially designed to be applied to various substrates including concrete, metal, geotextile and other lining membranes.

For more information on TC180 product data sheet, click the button below.

Request data sheet

LC 375

UV resistant

non-brittle

chemical resistant

TruCoat LC375 Lock Coat Primer is a solvent borne fluoroelastomer, offering outstanding chemical, temperature and permeation resistance. LC375 is designed to be used as a lock coat that provides superior adhesion for the XCR125 Finish Coat.

TruCoat LC375 Lock Coat may be used with all TruCoat rapid curing polyurea sealants and spray coating systems. LC375 is designed for use with XCR125 in severe duty environments subject to chemical and heat exposures.

For more information on LC375 product data sheet, click the button below.

Request data sheet

XCR 125

UV resistant

non-brittle

chemical resistant

TruCoat XCR125 Finish Coat is a combination of Viton and PTFE, offering outstanding chemical, temperature and permeation resistance. XCR125 Finish Coat is designed to be used in combination with LC375 Lock Coat and TruCoat Fast Set Spray materials.

TruCoat XCR125 Finish Coat should be used in combination with LC375 and TruCoat rapid curing polyurea sealants and spray coating systems. XCR125 is designed for use in severe duty environments subject to harsh chemical exposures.

For more information on XCR125 product data sheet, click the button below.

Request data sheet

TC 100

odorless

waterproofing

chemical resistant

TruCoat TC100 is a rapid setting, 100% solids, flexible, two-component pure Polyurea. This odorless volatile-free elastomeric is designed to be applied to concrete, metal, Styrofoam (EPS), spray foam and tank lining membranes.

TruCoat TC100 is a rapid setting, 100% solids, flexible, aromatic two-component pure Polyurea. This odorless volatile-free elastomeric is specially designed to be applied to concrete, metal, Styrofoam (EPS), spray foam and tank lining membranes.

For more information on TC100 product data sheet, click the button below.

Request data sheet